Cat 6a u utp network cable per roll

This CAT6A network cable is intended for permanent installation within structured network cabling. The cable features a solid core, solid copper conductors, an LSZH cable jacket, and complies with CPR fire class Eca, making it suitable for indoor installations where fire safety and consistent signal quality are required. Application This network cable is used for fixed cabling in office and residential environments. The cable is suitable for termination using LSA connection technology in patch panels, wall outlets, and distribution points. Construction and Features The cable consists of four twisted pairs with solid conductors, also referred to as a solid core. This construction is designed for permanent installation and ensures a stable position of the conductors, contributing to reliable signal transmission. The cable is not intended for repeated bending, unlike flexible patch cables. The LSZH cable jacket is halogen-free and limits smoke development and the release of corrosive gases in case of fire. Specifications • Category: CAT6A (500 MHz) • Shielding: U/UTP • Core: solid • Conductors: solid copper (CU) • Conductor construction: 4 twisted pairs • AWG: 23/1 • Impedance: 100 Ω • DC resistance: ≤ 93.8 Ω/km • Cable jacket diameter: approx. 6 mm • Insulated conductor diameter: approx. 1.03 mm (±0.05) • Minimum bending radius: 4× cable diameter • Installation temperature: ≥ -5 °C • Operating temperature: -20 °C to +60 °C • Meter marking: present • Cable jacket material: LSZH • Fire class: Eca (CPR) • Standard: ISO/IEC 11801 • Smoke development: low • Corrosive gases: none Explanation of Terms Used • Solid core: cable construction with solid conductors, intended for permanent installation and termination in LSA connections. • Solid conductors: copper conductors consisting of a single piece rather than multiple thin wires, ensuring dimensional stability and stable electrical properties in fixed installations. • Meter marking: length marking on the cable jacket that allows easy reading during installation of how much cable has been unrolled or remains. • LSZH: halogen-free cable jacket (Low Smoke Zero Halogen) that produces less smoke and does not release corrosive or toxic gases in case of fire, suitable for use in buildings. • ISO/IEC 11801: international standard describing the requirements for the design, performance, and installation of structured network cabling. • Fire class Eca (CPR): classification according to the European Construction Products Regulation that describes the fire behavior of cables and indicates that the cable meets the basic safety requirements for building installations. • AWG 23/1: wire gauge designation where "23" indicates the conductor diameter and "1" confirms that it is a solid conductor. • LSA: connection technology where conductors are terminated without soldering or screws in insulation displacement connectors for fixed network cabling. Ask a product question